geo.wikisort.org - Reservoir

The Enoggera Dam is a heritage-listed dam, which is located within the outer, western suburb of Enoggera Reservoir, in Brisbane, Queensland, Australia.

Enoggera Dam
Enoggera Dam, at the Brisbane Forest Park, in 2007
Location of Enoggera Dam in Queensland
Country	Australia
Location	South East Queensland
Coordinates	27.4473°S 152.927°E / -27.4473; 152.927
Status	Operational
Construction began	1864
Opening date	1866
Construction cost	£71,000
Dam and spillways
Type of dam	Clay cored earthfill dam
Impounds	Enoggera Creek
Height	23.5 m (77 ft)[1]
Length	475 m (1,558 ft)[1]
Dam volume	360×10^3 m3 (13×10^6 cu ft)[1]
Spillway type	Uncontrolled
Spillway capacity	450 m3/s (16,000 cu ft/s)[1]
Reservoir
Creates	Enoggera Reservoir
Total capacity	4,567 ML (1,005×10^6 imp gal; 1,206×10^6 US gal)[1]
Catchment area	33 km2 (13 sq mi)[1]
Surface area	75 ha (0.75 km2)
Maximum length	2,376 m (7,795 ft)
Maximum width	640 m (2,100 ft)

History

The Enoggera Dam was constructed in 1866, on the upper reach of Breakfast Creek (which section was later renamed Enoggera Creek). It was the first major dam built in Queensland and the second major dam built in Australia  (the first major dam, Yan Yean Reservoir having been built in Victoria in 1850).[2] It is rare as one of the few remaining examples in Queensland of an intact and functioning reservoir and treatment plant from this period in time. The clay-cored earth-fill dam was designed and built by Joseph Brady.[2][3]

Water supply problems plagued Brisbane's early years. Soon after the Brisbane Municipal Council was established in 1860, a Water Supply Committee was formed.[4] The earliest reservoir in Brisbane, which was located on the present Law Courts precinct at the intersection of George, Roma and Turbot Streets, suffered from accumulation of dead animals and vegetable matter.[4]

Site selection

Breakfast Creek was rejected by the Water Supply Committee because it was too close to the town.[4] Thomas Oldham, an engineer who had worked on water supply to Melbourne, was employed to conduct a survey and solve Brisbane's problems.

One of Oldham's site recommendations on the Brisbane River near Dutton Park was dismissed because of its prohibitive costs.[4] The other site Oldham suggested was selected because it was where Enoggera Creek left the range.[5] The Surveyor-General, Augustus Gregory also suggested a site on Ithaca Creek. This location was abandoned because it had a small catchment size.

Enoggera Creek had a large catchment that rose higher in the D'Aguilar Range and had more smaller creeks flowing into it.[5] The location was steep and heavily timbered. It took eighteen months and ten different contractors to just clear the site.[5]

Construction

The Queensland Government didn't have confidence in the Council to supervise the dam's construction. After requesting revised plans and detailed cost estimates the Board of Waterworks was established to oversee the project.[4]

Approval for the dam's construction was given in May 1864. Work began in August 1864, with water flowing by July 1866.[6]

A single wrought-iron mains pipe, 8 inches (20 cm) in diameter (in lieu of the 20 inches (51 cm) in diameter originally proposed by Oldham) supplied the town of Brisbane . The pipe arrived at Roma Street, with branch pipes from there to various parts of the town. By 1869 the pipelines were extended to a total of eighteen kilometers, benefiting between five and six thousand people.[5]

Three outlet pipes were incorporated into the design instead of the usual one or two.[2] This allowed the potential supply to increase if needed as well as providing some safety benefits.[2]

The original cost was £50,000, which was raised to £65,000.[6] By the end of 1870 more than £71,000 had been spent and water supply for the rapidly growing city of Brisbane was not being met by strong demand. To solve the problem another dam, Gold Creek Dam was approved in 1881.

A commemorative drinking fountain in the City Botanic Gardens is dedicated to the arrival of clean drinking mains water to Brisbane.[2]

Droughts and floods

Dry periods pronounced water quality problems in both Enoggera Dam and Gold Creek Dam built after the Enoggera reservoir was completed. The Mount Crosby Weir and pumping station alleviated some concerns but flooding of the Brisbane River was problematic. It was not until 1912 that water from Enoggera Dam was filtered.[7]

A spillway was added in 1976.[3] Seven metres was added to the height of the dam wall for flood mitigation in the same year.[5]

It was decommissioned in 2003, then in early 2006 water from Enoggera Dam was again added to inner north-west Brisbane's drinking water supply, when drought had reduced South East Queensland's water supply to critical levels.

During the 2022 eastern Australia floods, Enoggera Dam reached a capacity of 270%, leading to severe flooding in the Enoggera Creek catchment.

Current use

The dam was managed by the Brisbane City Council until July 2008, until it was transferred to Seqwater in a region-wide redistribution of water assets. During summer the recreational area is a popular place for local families to escape the heat.

There are walking tracks in the area, and no permit is required. In March 2014, Seqwater released a recreation guide that allowed for water activities including swimming, canoeing, kayaking and fishing with a licence.[8] The public recreational area is divided into areas for wading and for the launching of watercraft. Public access to the dam is via Walkabout Creek Wildlife Centre.

Heritage listing

The dam was listed on the Queensland Heritage Register in 2007.[3]

• 
  Enoggera dam ca. 1897
• 
  Enoggera dam in 2018
• 
  Dam construction ca. 1864

See also

• List of dams and reservoirs in Australia

References

External links

Media related to Enoggera Reservoir at Wikimedia Commons

---